• Remove the product from the packaging and lift the clip in the back to a 90 degree position until it snaps into place.
• Set the device to the level of scent you want.
• Clip the device on the vent closest to you, making sure the vent is open and air is coming out of it.
• If you are using the heating or air-conditioning, the scent will be stronger so you may need to change the setting.

• Keep out of the reach of children and pets.
• There is very little risk of the fragrance oil leaking from the clip. However, if you do get the fragrance oil on your skin, wash your hands thoroughly.
• If the fragrance oil leaks on the vent or a surface, wipe immediately with a clean, dry cloth.
• Do not ingest the fragrance oil.

The product contains scented oil. When the clip on the back of the product is lifted and snapped into place it makes small holes in the foil covering the scented oil. The scented oil then soaks into a porous material. The air from the car vent spreads the fragrance throughout the car. At the top of the clip there is an adjuster which lets you control the strength of fragrance.

When the dial is on ‘LOW’, the scent should last up to 30 days. When the dial is on ‘HIGH’, the scent may also last up to 30 days depending on the speed and temperature of the vent. When you can't smell the scent anymore, it's time to replace the clip.

No, the scented oil will not freeze. The Car Vent Clips are tested for use under many conditions. When used properly, the product will not freeze or break open during winter use. For best performance, we recommend storing the unused product at room temperature until you are ready to use it.

The product has been tested on the vents of most common makes and models of car, but it may not fit all vents due to the thickness of the slats or the type of vent. You can place the product on any of the car’s vents. For the most benefit you should use a vent that is closest to you and make sure air is being circulated.

The Febreze Car Clips are designed to be used on car vents. It has not been tested for use in the home.

The product is designed to fit both vertical and horizontal slats, with the fragrance-strength adjuster on the product facing upright or sideways. We recommend that, if possible, you put the product in the upright position so you can control the strength of the scent more easily.

We check the quality of our products many times during the manufacturing process. Make sure the clip in the back of the device has snapped into place and is at a 90 degree angle. Make sure you have set the level of scent to ‘HIGH’. It may take a few minutes for the fragrance to be released. Check the bottom corners of the product to see if there are small holes in the foil (which indicates that the scent is being released). If there are no puncture holes, try snapping the clip into place again.

We check the quality of our products many times during the manufacturing process. If you get the fragrance oil on your hands, wash them well with soap and water. If you get the fragrance oil on the surfaces in your car, wash them with mild soap and water and dry with a clean, dry cloth to avoid damage.

We check the quality of our products many times during the manufacturing process. The product is designed to fit the vents of most cars. Some vents are too large and in some vehicles the clip’s prongs aren’t long enough to grab onto those vents.

Back to project blog.